17 Gauge Q235 Galvanized Wire — Built for the Demands of Real Site Work

Q235 is a Chinese national standard low-carbon structural steel grade widely used in construction wire, rebar, and structural components. Its yield strength of at least 235 MPa and tensile strength typically between 375 and 500 MPa give the wire enough load-bearing capacity to hold steel rebar in position under the weight and movement of a concrete pour. Its elongation rating of at least 20% means the wire can be bent and tightened by hand without fracturing — important when tying speed and site conditions do not allow careful positioning.

At 17 gauge, the wire is thick enough to produce a tie that holds under pour pressure, while remaining light and manageable enough for fast binding without specialized tooling. Heavier gauges hold well but slow the tying process; lighter gauges tie quickly but are more likely to slip or deform before the concrete sets.

The galvanizing process bonds zinc to the wire surface. Zinc acts as a sacrificial anode: it oxidizes and forms zinc oxide before the underlying steel is exposed to oxygen or moisture, which means the wire resists rust even when buried in damp fill, embedded in concrete, or left exposed on site between pours. Q235 galvanized wire also performs reliably in the alkaline environment inside fresh concrete, where untreated steel wire would begin to corrode during cure.

Call or WhatsApp 726-3428, or visit Lot 24 Novar, Mahaicony to confirm current stock and pricing.

WhatsApp 726-3428 Get a Quote